Corsair HG10 Guide d'installation télécharger pdf (Page 7)

HG10 – N780 Edition

2. Remove the stock blower

3. Install the stock blower

Now that the stock blower has been unplugged, remove the stock blower from the heatsink by unscrewing the

three screws underneath the blower. Make sure to keep the screws from the stock heatsink, we will use these

for the next step.

Next, route the stock fan blower cable through the HG10 bracket and secure the blower to the bracket using

the same screws from the previous step.

1 2 3 4 5 6 7 8 9 10 11 12 ... 65 66

Pas de commentaire

Corsair HG10 Guide d'installation Page 7