Corsair HG10 Guide d'installation télécharger pdf (Page 8)

HG10 – N780 Edition

4. Install the fan shroud

5. Install the bracket

Now that the stock blower has been installed onto the bracket, place the HG10 fan shroud onto the bracket and

tighten the four screws to secure.

Reconnect the stock blower’s power cable to the card and mount the bracket onto the card. Next, use the

provided M3 screws to secure the bracket. Hand tighten the screws until the bracket is snug, but do not

over torque.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 65 66

Pas de commentaire

Corsair HG10 Guide d'installation Page 8